10 CATALOGUE 2026 PROBE WITH A FLAT INTERIOR STANDARD PROBE DIAMÈTRE 2x32mm PE 32x3.0 PN16 SDR11 PE100 4x32mm PE 32x2.0 PN10 SDR17 PE100 4x32mm PE 32x3.0 PN16 SDR11 PE100 2x40mm PE 40x2.4 PN10 SDR17 PE100 2x40mm PE 40x3.7 PN16 SDR11 PE100 2x40mm PE 40x3.7 PN16 SDR11 PE100 - RC 4x40mm PE 40x2.4 PN10 SDR17 PE100 4x40mm PE 40x3.7 PN16 SDR11 PE100 2x50mm PE 50x3.0 PN10 SDR17 PE100 All probes comply with the next quality standards: Approved by SP SITAX under the number SC1106-11. P-quality mark of SP SITAC under the number SC1106-11. RC = « Resistant to Crack » A higher resistance against cracks that occur overtime in comparison with PE100. All other material has the same components as PE100. The probes are delivered from the factory standard with a protective U-turn and integrated weight. There is a choice in weights of 5 or 15 kg. The length of the probe foot (with the integrated U-turn and weight) is 320mm (5kg) or 550mm (15kg). The probes are being tested on quality with air pressure and rolled up on a cleaver way for easy use and transportation. The probes are available in lengths of 50 until 300 meters.
RkJQdWJsaXNoZXIy MTkyODMyNw==